W&H MS, Инструкция по эксплуатации

Страница: 20 / 72

20
Table 1: list of the MENU options
MENU SUB-MENU WHAT IT DOES
(continues
on next
page)
- Displays pending messages. Refer to Chapter 8 for a detailed list of messages.
Select a previously recorded cycle. Press OK and then scroll the list of the recorded cycles with
UP /DOWN. Press OK to select the cycle to be viewed or printed.
Displays the selected cycle. Press UP/DOWN to scroll the cycle report.
(*)
Prints the selected cycle. Press OK and scroll UP and DOWN to change the number of copies to
be printed. Once the value is displayed, press OK to print.
(*)
Prints traceability labels for the selected cycle. Press OK and scroll UP and DOWN to change the
number of copies to be printed. Once the value is displayed, press OK to print.
(*) Saves a cycle data file on a memory storage device (memory card or PC).
Displays all the alarms that have occurred during sterilization cycles.
(*) Prints all the alarms that have occurred of the sterilization cycles stored in memory.
Sets important parameters of the sterilizer such as date, time, language, etc.
Confirm (OK) to access all available options. Refer to TABLE 2 for a detailed list of options and related programming.
(*) Enables the automatic water feed
Press UP/DOWN to scroll the YES/NO options,
then press OK to enable/disable the function
(warning), or BACK to exit without saving.
(*) Enables water quality warnings based
on the external/internal sensor (*)
Allows the user to change the current user level. Access to advanced level or service level is
password-protected.
See “How to log in as an advanced user” in the following pages.
Allows the user to enter the activation code in order to enable some optional features.
(*) available/effective only if an endorsed device (printer, logger, PC, water supply, etc.) is connected and enabled in the SETUP menu.