WAMGROUP SBB 125 C Скачать руководство пользователя

Страница: 28 / 57

5.0 INSTALLATION AND FIXING

EXT.SBB-HFF.--.M.A.0219.EN Issue: A

02.19

SBB-HFF

MODELS C, S, M

The machines are already partially assembled; the frame is to be assembled and the hopper is to be installed

(see below).

- All the machines must be fixed to the ground or to a solid structure before use.

- Make the electrical connections of the electric vibrator to all the machines.
- For all the assembly operations listed above, proceed as described below.

NOTE:

It is the installer’s responsibility to dispose off the packaging in a suitable manner, in compliance with

existing legislation.

Use lifting equipment that is suitable for the weight, dimensions and movements required.

Hook the equipment to the lifting device by means of flexible straps and use hooks with safety fasteners.

Do not use clamps, rings, open hooks or other systems which do not guarantee the same safety as shackles

or hooks with safety fasteners.
If the straps are in close contact with the equipment it is advisable to place protective elements between the

two to avoid damage.

Caution

1) Use lifting equipment which acts from above.

2) Keep the equipment at a minimum distance above the ground.

3) Do not stand near or walk under suspended loads.

Содержание SBB 125 C


























































Результаты поиска

Содержание SBB 125 C

Отзывы:

Похожие инструкции для SBB 125 C

Бренды по названию

Популярные бренды

WAMGROUP SBB 125 C, Сборка и основные инструкции по использованию и обслуживанию

Результаты поиска

Содержание SBB 125 C

Отзывы:

Похожие инструкции для SBB 125 C

Бренды по названию

Популярные бренды