WamBlee W440, Инструкция по эксплуатации

Страница: 9 / 16

In detail, as for the wire connector marked as (4) (lower part), please see
the following connections:
Pin Connection
1 Ground (NMEA out)
2 NMEA proprietary sentence output
3 Buzzer line
4 +V (for special application)
5 Ground
6 NMEA line (A)
7 NMEA line (B)
To the left of the connector are two DIP switches whose function is
explained in the chapter "Using the W440 and its programming."
For connection to the data output of your receiver use the NMEA two
terminals (pin 6 and 7 of the lower connector). This port is capable of
accepting a signal according to the standard NMEA 0183 at 38400 baud.
On the front of the W440 are two indicator lights (LEDs 2, 3) Here below is
the table of their functionality.
Led Status Function
Green Fixed on Operative
Red Fixed on AIS Alert received
Red Flashing Speed and communication check during power on
9
EN