Introduction
9
Waltron User Manual 101-045-E.1
9031CX Sodium Analyzer
1
INTRODUCTION
1.1
OVERVIEW OF THE 9031CX SODIUM ANALYZER
The Waltron 9031CX Sodium Analyzer is a microcontroller-based unit used for online measurement of
sodium content in various water chemistry/treatment applications. Sampling points for power generation
include mixed bed outlets, extraction pump discharge, boiler feed, boiler drum and steam. The
measurement range of the 9031CX analyzer spans from 0.01ppb to 10ppm.
1.1.1
CHECKLIST OF MATERIALS
In order to ensure customer satisfaction, Waltron does its best to provide adequate and timely packaging
and shipping services. Please perform the following after receiving a shipment:
Inspect all shipping containers upon receipt and record any visible damage. If there are any outward
signs of damage, please retain all containers and packages for inspection by carrier. Please retain all
packing material so that it can be used for future moving and shipping needs.
Check all items received against those on the packing list. Chemicals are usually shipped in a separate
package and will be itemized accordingly.
Verify that the number of packages received agrees with the packing list and shipping papers.
Notify both Waltron and the carrier if any problems occur.
1.1.2
MAIN FEATURES
Features of the 9031CX Sodium Analyzer unit include:
1.
Measurement of sodium concentration
a)
Wide range analysis - 0.01ppb to 10ppm. Concentration and temperature are displayed
continuously and analyzer adjusts automatically to user specified ranges.
b)
Automatic temperature compensation
c)
Protection from “Hot Sample”
2.
Calibration
a)
Single & two point calibration
b)
Low reagent and standard consumption
c)
Internal diagnostics used to show probe status
3.
User Interface
a)
4.5” color touch screen HMI
b)
Large easy to read graphic display
4.
Communication Interface via RS-232 & RS-485 using MODBUS RTU protocol
5.
Analyzer Configuration :
a)
User configurable settings for recorder outputs and alarm set points
b)
Factory defaults can easily be reloaded to override user setting
6.
Automatically stores last 10 calibration and alarm logs.
7.
Complete analyzer diagnostics - individual transmitter module can be tested independently
8.
Dispatch mode facility
9.
3 Relay outputs for High, Low and General Alarm
10.
Two 4-20mA isolated current outputs
11.
Wide range of input power supply 90VAC to 250VAC
