Walther-Werke smartEVO11, Руководство по эксплуатации

Страница: 6 / 32

Safety instructions
6 DOK BEMO 11/20 Rev.01 PM
2.2.2 Requirements for installer
f
Read the instructions before working on the wallboxes.
f
Before carrying out any work on the wallboxes, observe the five safety rules defined in accordance
with DIN VDE 0105[4]:
– Unlock
– Secure against restarting
– Ensure absence of voltage at all poles
– Ground and short-circuit
– Cover or block adjacent live parts
2.2.3 Requirements for operators
f
Read the instructions before using the wallboxes.
f
Check wallboxes for external damage.
f
In case of damage, contact the operator. Stop using the wallboxes.
2.2.4 Supplied documents
In addition to these instructions, the scope of delivery may include additional documents as well as instructions
for device components.
f
Supplied documents must be observed.
2.3 Foreseeable misuse
Non-observance of required protection class
Use of wallboxes with a lower protection class than required at the installation site.
f
Only use wallboxes with a protection class that corresponds to the place of use.
Operation without protective devices
Operating the wallboxes without the specified and recommended protective devices.
f
Only operate wallboxes with intact residual current devices.
f
Only operate wallboxes with an intact housing.
f
Do not operate wallboxes with miniature circuit breakers / residual current devices (MCB/RCD type B)
downstream from miniature circuit breakers / residual current devices (MCB/RCD type A).
2.4 Residual risks
Risk of injury caused by fire
Covering the wallboxes can cause heat to build up in the housing, which can result in a fire.
f
Ensure that the wallboxes are mounted with free clearance to the side and the front.
f
Do not cover wallboxes with any other objects.
f
Do not place any objects on the wallboxes.
Death or risk of injury from electric shock
If used improperly, there is a risk of death or injury from electric shock.
f
Only operate wallboxes with specified and recommended safety devices.
f
Work with the cover removed may only be carried out by qualified electricians.
f
Pull the connection and charger cables out of the socket only by grasping the plug, not the cables.
f
Do not bend, pinch or run over connection and charger cables.
f
Immediately take wallboxes with defective parts out of operation. Have any loose or defective parts
replaced by a qualified electrician.