26
27
3
Safety instructions
3.1
Identification of safety instructions
Warning
The pictogram and the urgency level “
Warning
“ identify a possible danger to per-
sons.
Possible consequences: Slight to severe injuries.
Attention
The pictogram and the urgency level “
Attention
“ identify a possible danger to mate-
rial assets.
Possible consequences: Damage to material assets.
Note
The pictogram and the urgency level “
Note
“ identify additional information for the
safe and efficient operation of the spray gun.
3.2
Generally Applicable Safety Precautions
All applicable accident prevention rules and regulations as well as other recognised
industrial safety and health rules and regulations must be observed at all times.
Use the spray gun only in well-ventilated rooms. Fire, naked flames and smoking
are strictly prohibited within the working area. WARNING – during the spraying of
flammable materials (e.g. lacquers, adhesives, cleaning agents, etc.), there is an
increased risk to health as well as an increased risk of explosion and fire.
You must ensure that the spray gun is properly earthed (grounded) either separately
or in connection with the equipment with which it is being used (maximum resi-
stance 10
6
Ω
).
Before carrying out maintenance or servicing work, always ensure that the air and
material feed to the spray gun have been de-pressurised. Risk of injury!
When spraying materials, do not place your hands or other parts of the body in front
of the pressurised nozzle or the spray gun. Risk of injury!
Never point the spray gun at persons or animals. Risk of injury!
Always observe the spraying and safety instructions given by the manufacturers of
the spraying material and the cleaning agent. Aggressive and corrosive materials in
particular can be harmful to health.
Exhaust air containing particles (overspray) must be kept away from the working
area and personnel. In spite of these measures, always wear the regulation brea-
thing masks and protective overalls when using the gun. Airborne particles repre-
sent a serious health hazard!
Always wear hearing protection when using the gun or when in the vicinity of a gun
that is in use. The noise level generated by the spray gun is approx. 83 dB (A).
After carrying out assembly or maintenance work, always ensure that all nuts, bolts
and screw connections have been fully tightened before the gun is used.
Use only original replacement parts, since WALTHER can only guarantee safe and
fault-free operation for original parts.
For further information on the safe use of the spray gun and the spraying materials,
please contact WALTHER Spritz- und Lackiersysteme GmbH, D-42327 Wuppertal,
Germany.
4
Assembly / Installation
This spray gun is delivered in completely assembled condition. Before taking the
spray gun into operation perform the following preparations:
4.1
Mounting of Spray Gun
Install the gun in a suitable and stable mounting device as shown in the following
example:
Use mounting pin 1, diameter 12 mm.
Other mounting devices upon request.
4.2
Connection of Input Lines
Warning
Make sure not to confuse the control and atomizing air (round - and wide/flat air)
connections -risk of injury.
Standard version
Circulation version
Material inlet
Inlets:
R - Round jet
B - Wide/flat jet
ST - Control air
The spray gun is now properly installed and connected and ready for operation.
1
Содержание PILOT WA 450
Страница 3: ...4 5 PILOT WA 450...
