5
3.3 Remaining hazards
When using the machine according
to regulations some remaining
hazards may still exist
Touching the cutting tool in the
machining area can cause injury. For
effective protection the fence guard
must always be adapted to the
workpiece and to the machining
operation.
Risk of kickback. The workpiece is
caught by the rotating cutter and
thrown back to the operator.
Thrown workpiece parts can lead to
injury.
Sawdust and noise can be health
hazards.
Be sure to wear personal protection
gear such as safety goggles and ear
protection. Use a suitable dust
exhaust system.
The use of incorrect mains supply or
a damaged power cord can lead to
injuries caused by electricity.
4. Machine specifications
4.1 Technical data
Machine Table
610 x 360mm
Table with extensions
1030x360mm
Fence size
540-610 x 75mm
Dust port diameter D/d
100/57mm
Max router bit diameter
50mm
Overall dimension 1030x360x410mm
Weight
10 kg
Magnetic Switch:
Voltage / Frequency
230V / 50-60Hz
Max. power of router
1600W
Extension cord (H07RN-F) 3x1,5mm²
Installation fuse protection
10A
Isolation class
I
4.2 Noise emission
Depending on the router noise and
the type of operation….
see technical data of your router to
make a better estimation of the
hazards and risks involved.
4.3 Content of delivery
2 Table extensions
3 Table inserts
Miter gauge
Lateral workpiece clamp
Adjustable fence
Fence guard
Mounting plate
Dust port
Operating manual
Spare parts list
4.4 Description of unit
Fig 1
Fig 2
A…....Fence guard
B…...Dust port
C…...Miter gauge
D, G..Table extensions
E…..Magnetic On/ Off switch
F…..Lateral workpiece clamp
H….Table insert
I…...Adjustable fence
5. Transport and start up
5.1 Transport and installation
The tool is designed to operate in
closed rooms and must be placed
stable on firm and levelled surface.
5.2 Assembly
If you notice any transport damage
while unpacking, notify your supplier
immediately. Do not operate the
machine!
Dispose of the packing in an
environmentally friendly manner.
Attach the table extensions
Attach the table extensions (G, D,
Fig 1) with the supplied pan head
screws.
Attach the Legs to the Table
Fig 3
Attach the Switchbox
Fig 4
Attach the Fence to the Table
Fig 5
