manualshive.com logo in svg

Wallenstein WP245, Руководство оператора

Поделиться
Скачать
Wallenstein WP245 Скачать руководство пользователя страница 2

1.  Foreword

1.1  Introduction

Congratulations on your choice of a Wallenstein Wood 
Processor!

 

This high-quality machine is designed and manufactured to 
meet the needs of a proficient timber or woodlot industry.

The Wallenstein Firewood Processor improves firewood 
productivity, ergonomics and minimizes handling while reducing 
the risk of physical strain.

This manual covers the WP245 and WP275 three-point hitch-
mounted wood processors. The two models differ only in their 
splitter cradle capability:

Model

Split Opening

WP245

25" (61 cm)

WP275

36" (91 cm)

Keep this manual handy for frequent reference and to pass on 
to new operators or owners. Call your Wallenstein dealer or the 
Distributor if you need assistance, information, or additional 
copies of the manuals.

Units of measurement in Wallenstein Equipment technical 
manuals are written as:  
US Customary (SI metric)

Wallenstein Equipment Inc. • © 2021. All rights reserved.

No part of this work may be copied, reproduced, replaced, 
distributed, published, displayed, modified, or transferred in 
any form or by any means except with the prior permission of 
Wallenstein Equipment Inc.

 WARNING!

Do not attempt to start or operate the machine 

without thoroughly reviewing this manual for 

safe and proper operation.
Always keep this manual with the machine.

W034

 www.wallensteinequipment.com

Foreword

WP245 / WP275

3-Point Hitch Firewood Processor

2

Содержание WP245





















































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды