manualshive.com logo in svg

Wallenstein WP245, Руководство оператора

Поделиться
Скачать
Wallenstein WP245 Скачать руководство пользователя страница 14

3.  Warning!

Risk of serious injury or death if 
the engine is not shut off during 

maintenance procedures. 

Shut off the engine and remove the key. 

4.  Warning!

Risk of hands being crushed in this 
area. 

Keep hands clear of all moving parts. 

5.  Caution!

Refer to the operator's manual.

 Read 

ALL operating instructions in the 
manual and learn the meaning of ALL 
safety signs on the machine. 

The best safety feature is an informed 
operator.

6.  Caution!

Pinch point hazard

. When lowering 

or raising the chute into position, be 
aware of pinch points. 

Keep hands clear to avoid injury.

7.  Caution!

Winch entanglement hazard. 

When 

using the winch, keep hands clear of 
the winch rope to avoid injury.

8.  Caution!

Risk of machine moving 
unexpectedly. Make sure 
latch is in place during 
transport.

Personal injury or 
machine damage could 
result.

9.  Warning!

Always wear appropriate 
Personal Protective Equipment 
when using this machine. For 
example:

• A hard hat 
• Heavy gloves
• Hearing protection
• Protective shoes with 

slip resistant soles

• Protective glasses, 

goggles, or face shield

 Safety

WP245 / WP275

3-Point Hitch Firewood Processor

Safety

14

Содержание WP245





















































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды