Wallenstein MX Series Скачать руководство пользователя

Страница: 41 / 48

7�8 SEALING FLAP

Check the condition of the front frame sealing flap.

Replace sealing flap if not sealing the sides or bottom.

7�7 APRON CHAIN LINKS

Over a period of time the chain will become stretched

to a point where no further adjustment is available, at

this point links should be removed from the chain to

allow for further tensioning.

• At the chain adjusters, completely loosen tension

on both sides of the apron chain.

• Determine how many links to remove.

• Remove the cotter pins from the chain clevis pins,

separate the chain links.

• Use a chain breaker and carefully remove the

chain pin

• Remove the link, and repeat for the other side.

• Reassemble the links with the clevis pin, install

and secure cotter pins.

•

Note: when removing links from apron chain,

ensure the same number is removed from each

side

Chain Clevis

Pin

Cotter Pin

Содержание MX Series

















































Результаты поиска

Содержание MX Series

Отзывы:

Похожие инструкции для MX Series

Бренды по названию

Популярные бренды

Wallenstein MX Series, Руководство оператора

Результаты поиска

Содержание MX Series

Отзывы:

Похожие инструкции для MX Series

Бренды по названию

Популярные бренды