Wallenstein MX Series Скачать руководство пользователя

Страница: 26 / 48

4�9 FIELD OPERATION

OPERATING SAFETY

•

Close and secure all guards, deflectors and

shields before starting and operating.

• Read and understand operator's manual before

starting. Review safety instructions annually.

• Personal protection equipment (PPE) including

hearing protection, hard hat, safety glasses, safety

shoes, and gloves are recommended during

assembly, installation, operation, adjustment,

maintaining, repairing, removal, or moving.

•

Do not allow long hair, loose-fitting clothing, or

jewellery to be around moving parts.

• Do not allow anyone within 20 ft (6 m) of machine

while loading or operating the spreader. Keep

children away.

• Never place any part of your body where it would

be in danger if movement should occur during

assembly, installation, operation, maintenance,

repairing, unplugging or moving.

• Never operate controls from the ground. Operate

only from the operator's seat to prevent accidents

• Always spread up or down a slope. Avoid spreading

across a slope.

• When operating the spreader, be aware of

surroundings or obstructions such as:
• Bystanders

• Trenches

• Rocks

• Fences

• Never use alcoholic beverages or drugs which can

hinder alertness or coordination while operating this

equipment. Consult your doctor about operating

this machine while taking prescription medications.

• Do not allow riders on this machine at any time.

There is no safe place for any riders.

• Keep loading area clean and free of debris to

prevent tripping.

• Stop engine when leaving unattended.
• For safety ensure your tractor is equipped with a

ROPS.

• Do not start the spreader until you know everyone

is clear of the machine and have made sure no

tools are lying on or inside the spreader.

The operator has the responsibility of being familiar with all operating and safety procedures and following

them�

Although the Wallenstein Spreader is easy to use, each operator should review this section to familiarize themself

with the detailed safety and operating procedures. These procedures can be applied to all versions of the Spreader.

After following all operating safety and preparation procedures the spreader should be set up and ready to run.

Tractor manual should also be reviewed. When preparing this machine for use, follow this procedure:

4�9�1 PREPARE

• Clear the area of bystanders, especially small

children.

• Each operator must be trained and familiar with

the set up and operation of the Spreader and its

components.

• Review the machine components (see Section 4.2)
• Review and follow the Pre-Operation Checklist (see

Section 4.4).

• Review operation and function of the controls (see

section 4.6)

• Survey the work site, move to a clear, level work

area and position at the work site. Do not start the

spreader until it is in position.

• Set up the machine.
• Understand how to put the machine into

Safe

Condition

before working with this machine,

•

Shut off hydraulics or mechanical drive.

•

Shut off the engine.

• Ensure all components have stopped moving.

• Set the parking brake.

• Remove and pocket the ignition key.

Содержание MX Series

















































Результаты поиска

Содержание MX Series

Отзывы:

Похожие инструкции для MX Series

Бренды по названию

Популярные бренды

Wallenstein MX Series, Руководство оператора

Результаты поиска

Содержание MX Series

Отзывы:

Похожие инструкции для MX Series

Бренды по названию

Популярные бренды