Wallenstein CT16B, Руководство оператора

Страница: 32 / 48

7.6 Moving, Swinging the Conveyor
Sideways
• Shut the wood processor down.
• Unload the conveyor. Allow it to operate until all the split
wood has cleared then shut the engine down.
• Lower the conveyor down to the stops on the frame.
• Remove the blocks and rotate the wheels. See page 31
for instructions on wheel rotation.
• Push the conveyor to the new position.
• Block the wheels.
• Check the position of the hopper end of the conveyor.
Make sure it is placed so split wood falls properly from the
processor discharge chute.
• Reposition conveyor hopper if required, then drive a 1/2"
(12 mm) steel rod (not supplied) through the hitch into the
ground to anchor it there.
01849
Fig. 41 –
Steel Rod through Conveyor Hitch
Operating Instructions
CT16B / CT24B
Trailer Firewood Conveyor
32