Wallenstein CT16B, Руководство оператора

Страница: 23 / 48

6. Pre-start Checks
Before operating the conveyor, review this checklist.
Area to check
Make sure conveyor chain and drive belt are clear for
startup. Check for entangled material.
Park conveyor on stable, level ground. Block or chock
wheels so it cannot roll in either direction.
Check conveyor bearings are greased as per the schedule
outlined in the Maintenance Section.
Make sure that all covers, guards and shields are in place,
secured and functioning as designed.
Check all fasteners and tighten as required. Make sure
equipment is working as designed and in good repair.
If conveyor is off-loading into a truck or trailer, plan access
for this equipment.
Check that personal protection equipment including hard
hat, safety glasses, safety shoes, safety vest, hearing
protection and gloves are being used and in good repair.
Do not wear loose-fitting clothing or jewelry. Tie back
loose, long hair.
6.1 Before Starting the Engine
CAUTION!
Hearing loss hazard. Prolonged
exposure to loud noise may cause
permanent hearing loss. Use suitable
protection while operating the
machine.
W016
The operator has the responsibility of being familiar with and
following all operating and safety procedures.
Although this machine is easy to use, each operator should
review this section to get familiar with the detailed safety and
operating procedures.
1. Make sure the machine is set up correctly. Set conveyor
height and unlock hitch lock pin.
2. Check the engine oil level. See page 24.
3. Check the reduction case oil level. See page 28.
4. Check the fuel level. See page 24 .
5. Review the Safety Rules on page 8. Make sure
each operator is trained and familiar with the set up and
operation of the machine. Review the Controls (see
page
24).
6. Clear the area of bystanders.
CT16B / CT24B
Trailer Firewood Conveyor
Pre-start Checks
23