![background image](http://html2.mh-extra.com/html/wallas/26cc/26cc_installation-manual_3236326057.webp)
Maintenance
Picture 5
shows the different parts of the burner. Detach the thermal radiator, by
pressing the locking latch toward the burner cylinder wall and tilting the thermal
radiator.
Picture 5.
Scale is formed mostly on the bottom of the burner cylinder. Gently scrape the
scale off with, for example, a screwdriver. If necessary, also clean the burner cylin-
der walls and thermal radiator. The base mat should be replaced, at the same time
as the burner is cleaned.
Picture 7.
To assemble the burner, perform the steps listed above but in reverse order. When
assembling the burner cylinder, ensure that the thermal radiator is locked into
place. To make sure, turn the burner upside down and tap it. This should dislodge
the thermal radiator if it is not locked in place. When installing the burner assembly,
move it around to make it settle snugly in the heat exchanger. Twist the burner into
place and push the retainer spring under the burner.
The fuel needle is in the correct position when the needle is angled towards the
fuel pump. It is recommended that the fastening screws of the burner housing be
coated with heat-resistant grease to prevent jamming.
Radiation element
Locking tongue
Burner cylinder
Thermo element pipe
Fuel needle hole
Glow plug hole
Bottom mat
Crust
Picture 5. Burner parts
Bottom mat spring
Picture 7. Burner cylinder
Picture 6. Detaching the radiation element
en
26CC / 40CC
D80151
- 57 -
490525C
Содержание 26CC
Страница 12: ...12 D80150 Tekniset tiedot Toimintaperiaate fi 26CC 40CC P 12 V 490525C...
Страница 40: ...Technical information Operating principles en 26CC 40CC D80151 40 P 12 V 490525C...
Страница 68: ...Teknisk information Driftsprinciper sv 26CC 40CC D80152 68 P 12 V 490525C...
Страница 96: ...Teknisk informasjon Driftsprinsipper no 26CC 40CC D80158 96 P 12 V 490525C...