Walkera R400, Быстрый старт

Страница: 20 / 24

1) Short press the menu button
" ".
2) Short press the confirmation
button " ".
3) Move the 4D small joystick
down once.
16.4.1 Joystick mode switch
16.4.2 Joystick and dial calibration
16.4.3 System language switch
The operation is as follows
The operation is as follows
The remote control joystick mode and joystick calibration have been set at the factory.
If you need to switch and calibrate, please refer to the following methods;
Be sure to turn off the power of the aircraft or lock the motors before operation.
The remote control system language supports Chinese and English, which can be switched in the setting menu.
20
Walkera All Rights Reserved
R400
Quick Start Guide
5) Repeat the operation several
times for all mechanical stroke
ranges of the joystick and dial
from the smallest to the largest.
4) Short press the confirmation
button" ", and short press
the menu button to return to
the main page.
4) Short press the confirmation
button " " to enter the
calibration mode.
6) Short press the confirmation
button " ", the screen
displays "Success", indicating
that the calibration has been
successful.
7) If the screen displays "Fail" and
a buzzer sounds, it means the
calibration has failed. Please
short press the confirmation button
" " to recalibrate.
1) Short press the menu button
" ".
2) Short press the confirmation
button " ".
3) Move the 4D small joystick
down twice.
2) Move the 4D small joystick
down twice.
3) Short press the confirmation
button " ".
1) Short press the menu button
" ".
4) Short press the confirmation
button " " , the system
language will switch between
Chinese and English.
The operation is as follows