Walkera R400, Быстрый старт

Страница: 18 / 24

Take Photo: Short press the camera button “ ”on the remote control once to
take a photo of the camera and save it to the aircraft memory card.
Video: Short press the remote control video button “ ”once, the camera will
start recording, short press the video button“ ”again, the camera will stop and
save the video to the aircraft memory card.
18
Walkera All Rights Reserved
R400
Quick Start Guide
Attention:
1) When video recording, it is not possible to switch the Auto mode and Manual mode; in the Auto mode,the exposure
compensation(EV) can be adjusted only; in the Manual mode, the sensitivity(ISO)value and the exposure
compensation(EV) can be adjusted, and the shutter speed(Expose)value cannot be adjusted.
2) In Manual mode, when the shutter speed(Expose)value and the sensitivity(ISO)value are increased in dark scenes,
the image screen becomes brighter. If the camera lens is facing a brighter light, the screen is often burst, you need
to adjust the shutter speed(Expose) value or the sensitivity(ISO) value to readjust the image brightness; when the
picture is manually adjusted in a brighter scene, when the camera lens is aimed at a darker place, the shutter value
speed(Expose) or the sensitivity(ISO) value must be adjusted manually to adjust the picture.
The downward fixed height system uses lidar to emit light pulses to detect the distance between the aircraft and the ground
below to get the current height of the aircraft (the height can be determined only when the flying height is less than 3 meters).
16.0 Additional remarks
16.1 Downward fixed height system
LiDAR Height Fixing System
1)Manual Landing, AUTO Landing or Return to Home function landing, lock the motor after landing on the ground.
2)Turn off the power of the aircraft first, and then turn off the power of the remote control.
3)Finally, remove the battery from the aircraft.
15.0 End flight
14.2 Photo & Video
Note: The aircraft cannot be operated by the touch screen until the APP main screen displays a image transmitted from the aircraft.
Photo and video can be controlled by the physical buttons of the remote control or in the APP interface
The main interface of the APP controls photos or videos
1) Select working mode: take photo or video
；
2) Tap the camera icon “ ” to take a photo
；
3) Tap the video icon “ ” to start recording, and tap the video icon “ ” again
to stop the video and save the video to the aircraft memory card.
The physical buttons on the remote control control photos or
videos
00:00
Video
icon
Photo
icon
Operating
mode
Camera
settings