Walkera R400, Быстрый старт

Страница: 8 / 24

Charging operation steps:
6.1 Charging the aircraft battery
6.0 Charging
Connect the charger power cord, charger, and aircraft battery as shown in the figure.
1) After connecting the battery and the charger, the charger indicator lights up and the battery starts to charge.
2) After the charger is fully charged, the green light on the charger turns on, please remove the battery from the charger.
Connect to AC power 100~ 240V
Remote control: Press and hold the power switch for 2~ 3 seconds to turn on the remote control (repeat this operation to turn off the
remote control), and check the battery level on the LCD display.
Aircraft battery power: Short press the power switch once and the power indicator is always on (display power).
8
Walkera All Rights Reserved
R400
Quick Start Guide
6.2 Charging the remote control
Tip:
This remote control uses a built-in integrated rechargeable lithium battery, compatible with the market standard Micro
USB interface, and a 5V power adapter (such as a USB charger for digital products such as mobile phones and
cameras) for charging. If you encounter smoke, peculiar smell, or liquid leakage
while charging the remote control, please do not continue to charge the remote
control, please send it to our company for repair.
Do not charge the product in the area where babies touch,
to avoid the risk of electric shock.
Do not charge this product in an environment exceeding 60°C.
5.0 Check Battery Levels