![background image](http://html1.mh-extra.com/html/walinga/ultra-veyor-system/ultra-veyor-system_operators-manual_3195408015.webp)
13
3.
2.6 PREPARATION
2.7
INSTALLATION
SAFETY
1. Never operate the Ultra-Veyor System and auxiliary
equipment until you have read and completely
understand this manual, the auxiliary equipment
Operator's Manual, and each of the Safety Messages
found on the safety signs on the and auxiliary equipment.
2. Personal protection equipment including hard hat, safety
glasses, safety shoes,
and
gloves
are
recommended during
assembly, installation,
operation, adjustment,
maintaining, repairing,
removal, or moving the
implement.
Do
not
allow long hair, loose
fitting clothing or jewelery to be around equipment.
PROLONGED EXPOSURE TO LOUD
NOISE MAY CAUSE PERMANENT
HEARING LOSS!
Motors or equipment attached can often be noisy
enough to cause permanent, partial hearing loss. We
recommend that you wear hearing protection on a full-
time basis if the noise in the Operator's position
exceeds 80db. Noise over 85db on a long-term basis
can cause severe hearing loss. Noise over 90db
adjacent to the Operator over a long-term basis may
cause permanent, total hearing loss.
NOTE:
Hearing
loss from loud noise (from tractors, chain saws, radios,
and other such sources close to the ear) is cumulative
over a lifetime without hope of natural recovery.
1. Disconnect and remove all mechanical locks, anchor
chains and any other transport devices that would hinder
or prohibit the normal functioning of the Ultra-Veyor
System upon start up. Serious damage to the machine
and/or personal injury to the operator and bystanders
may result from attempting to operate the machine while
mechanical locking devices are still attached.
2. Anchor the machine to firm, level ground before
operating.
3. Level the frame before using or loading.
4. Have at least one extra person available to assist when
elevating, moving or connecting to other equipment.
5. Make certain that sufficient amperage, at the proper
voltage and frequency (60Hz) is available before
connecting power for the electric model. Have a licensed
electrician provide power to the machine. Always follow
ANSI/NFPA 70 Standard and all local codes when
providing electrical power.
6. If using Ultra-Veyor System as part of material handling
system, anchor securely before starting.
7. Vent discharge air from blower to outside.
4.
Clear working area of debris, trash or hidden ob-
stacles that might be hooked or snagged, causing
injury, damage or tripping.
5.
Operate only in daylight or good artificial light.
6.
Be sure machine is properly anchored, adjusted and
in good operating condition.
7 Ensure that all safety shielding and safety signs are
properly installed and in good condition.
8. Before starting, give the machine a "once over" for any
loose bolts, worn parts, cracks, leaks, frayed belts and
make necessary repairs. Always follow maintenance
instructions.
Содержание ULTRA-VEYOR SYSTEM
