12
7.
Operation of the device
7.1
Adjust tilt angle
1.
Open tilt lever.
2.
Adjust the required tilt angle.
3.
Tighten tilt lever.
7.2
Switch the device on and off
The lamps can be switched on and off flexibly through the three tappet
switches on the operation panel.
1.
Switch on device and lamp:
Set tappet switch of the selected lamp on I.
The selected lamp lights up.
2.
Switch off device and lamp:
Set tappet switch LEUCHTMITTEL of the selected lamp on O.
The selected lamp will go out.
8.
Transportation and storage
1.
Switch off device.
See
Switch on and off of the device
.
2.
Let the device cool down completely.
WARNING!
Danger of burning through hot parts. Let the device cool
down completely.
3.
Screw out lamps and store them securely.
See
Screw in and out of lamps
.
4.
Demount power cord.
5.
Clean the device if necessary.
See
Cleaning
.
6.
Put the device and all demounted elements in one carton and carry and
store them according to the requirements in the technical
specifications. See
Technical specifications.
9
4.
Overview about the parts
A
Reflector
B
Lamps
C
Daylight 450
D
Fixing knob for tripod (optional)
E
Tripod mounting
F
Locking knurl for tilt angle
G
Tilt lever
A
Tappet switch LAMP O/I
B
Tilt lever
C
Fuse holder for micro-fuse
D
Socket for power cord
E
Ventilation slots
A
B
F
D
C
B
C
D
E
E
A
G
