walimex daylight 450, Инструкция по эксплуатации

Страница: 10 / 10

10
5. Quick start guide
ADVICE:
The detailed instruction for the following operations can be found in the
respective chapters in this instruction manual.
Keep the sequences of the following operation steps when using the device
for the first time to avoid damages on the device.
WARNING
Please note the safety notes in the respective chapters throughout
operation.
•
Mount the device on tripod (optional).
•
Screw in lamp.
•
Adjust tilt angle.
•
Connect to power supply.
•
Switch the lamp on and off.
6. Preparation for operation
6.1 Mount the device on tripod (optional)
ADVICE:
Please note the user information of the tripod manufacturer.
WARNING
Select a tripod of suitable weight and dimensions. See Technical
Specifications .
Make sure, that the tripod with the mounted device has a tilt and skid
resistant stand.
1. Loose locking knurl.
2. Mount the device on the tripod.
3. Tighten locking knurl.
11
6.2 Screw in and out of lamps
WARNING
Danger of cutting and splitting through breaking or bursting lamp
Don´t let the lamps fall down.
Don´t touch the lamps with bare hands. Just touch the lamp at the plastic
socket or wear clean cotton gloves or use a clean cloth.
ADVICE:
Possible discolouration through burn marks on the lamps
.
1. Switch off device.
See
Switch on and off of the device .
2. Disconnect from power supply:
Plug out power cord.
3. Let the device cool down.
CAUTION! Danger of burning on lamps. Let the device cool down for
approx. 15 minutes.
4. Screw in lamps:
Screw in the lamps carefully.
WARNING! Danger of electric shock. Always screw in all three lamps
as to avoid touching in the sockets, when the device is switched on.
5. Screw out lamp:
Screw out the lamps carefully and store it securely.
6.3 Connect to power supply
1. Switch off device.
See
Switch on and off of the device .
2. Compare the local power supply with the connected load of the device.
See
Technical specifications .
If the values differ, please contact info@foto-walser.de or tel. +49 84 32
/ 9489-0.
3. Connect the power cord with the socket on the device and with the
power socket.