14
10.
Maintenance
10.1
Continuous inspections
What you should do?
Before every
operation
With every
change
Check all cables and plugs for damages.
In case of damage:
WARNING!
Danger of electric shock
and fire through short-circuit. The device
should be repaired by an electrician
immediately.
X
Check, if the lamps are screwed in firmly.
In case of damage:
WARNING!
Danger of electric shock
and fire through short-circuit. The device
should be repaired by an electrician
immediately.
X
10.2
Cleaning
WARNING
Danger of cutting and splitting through breaking or bursting lamp
Don´t let the lamps fall down.
Don´t touch the lamp with bare hands. Just touch the lamp at the plastic
socket or wear clean cotton gloves or use a clean cloth.
WARNING
Danger of electric shock
−
The contact with moisture or water should be avoided.
−
Unplug the power cord before cleaning the device.
ADVICE: Just use the following specified cleaning supllies.
7
The device, accessories and easily inflammable materials in the near of
the device could catch fire.
−
Don´t cover the ventilation slots of the device during operation.
−
Please just use accessories and spare parts, which are conform to the
required specifications.
See
Technical Specifications
.
−
Lamps, which are damaged or deformed through heat, should be
exchanged immediately.
−
Remove easily inflammable materials, which are in close distance to
the device.
CAUTION
Danger of burning on hot parts
The lamps could heat up up to 70°C.
−
Don´t touch the parts during operation and cooling down.
−
Please cool down your device completely before starting any
mounting or maintenance arrangements.
WARNING
Danger of cutting and splitting through breaking lamps,
possible discolouration on the lamps
Lamps can break and split, when they fall down.
Even small residues of skin oil on the lamps could lead, due to the high
heat impact, to the splitting of the lamp. Broken glass could hurt eyes and
skin.
