16
3.
Open fuse holder:
Use a small screwdriver to lift up the fuse holder carefully and slightly.
4.
Pull out the fuse holder with your hands completely out of the slot.
5.
Take out the old micro-fuse.
6.
Take the new micro-fuse out of the spare slot and slide it into the
center of the holder.
7.
Slide the fuse holder carefully into the slot as far as it goes.
11.
Accessories and options
You can find extensive accessories for your device in our webshop.
12.
Spare parts
Part of the device
Item number
Lamp (walimex Spiral Daylight 35W)
16232
Power cord
12914
13.
Disposal and environmental protection
Your device should be disposed free of charge at the local disposal points.
5
2.
Important safety notes
WARNING
Risk of eye injury
The optical radiation of the lamps could blind your eyes and lead to
afterimages, if persons and animals look into the lamp directly. This could
lead to injuries. Please avoid persons and animals looking into the flash
directly.
WARNING
Danger of crashing, entrapment and fire through the falling down of the
device
The weight of the device is 1,6kg.
−
Make sure, that the device is always positioned tilt and skid resistant
and stored securely.
−
Keep out of reach of children and animal. They could overturn the
device.
−
Avoid placing cables, where they can be tripped over. The device
could be overturned.
WARNING
Danger of electric shock, burn hazard
Please note, that the device is still connected with the supply voltage
even if it is switched off. Just after disconnecting the device from the
power supply through pulling out the power cable, the device is actually
de-energized.
−
Switch off your device when it is not in use.
−
Switch off your device before mounting and maintenance and
disconnect from power supply.
−
Protect your device against unintended switching-on.
−
Unplug the power cord, if the flash is not in use for a long time.
WARNING
Danger of electric shock, fire through short-circuit
A short-circuit could be caused through defect cables and through
