Waldorf RNL8200G Series, Инструкция по установке и эксплуатации

Страница: 16 / 32

14
Rear Adjustable Feet, fitting:-
1. Raise appliance from floor by approximately
75mm using suitable lifting equipment (i.e.
Palletiser / Forklift) to allow rear rollers to be
removed.
2. Unscrew and remove securing bolt that secures
rear roller to rear leg housing.
3. Rear roller will drop freely from rear leg
housing.
4. Remove second rear roller.
5. Screw rear adjustable feet into rear leg
housings and tighten hand tight.
6. Lower appliance back to floor and adjust
adjustable feet to level appliance.
Rear Rollers, fitting:-
1. Raise appliance from floor by approximately
75mm using suitable lifting equipment (i.e.
Palletiser / Forklift) to allow rear adjustable feet
to be removed.
2. Unscrew and remove both rear adjustable feet
from rear leg housings.
3. Fit rear roller to rear leg housing and align
screw hole in side of rear leg housing with
threaded hole in rear roller.
4. Secure rear roller to leg support with bolt
supplied and tighten bolt using a 10mm A/F
spanner.
5. Fit second roller and tighten.
6. Lower appliance back to floor and adjust front
adjustable feet to level appliance.
Fig 2
Cabinet /
Refrigeration
Base
Adjustable
Foot
Rear
Roller
Roller
Locating Bolt
Rear Leg
Housing