Waldorf RN8110GE, Инструкция по установке и эксплуатации, Страница: 12 / 27

10
Installation
NOTE:

This appliance must be earthed.

Fixed wiring installations must incorporate an all-pole disconnection switch.
9. Correctly locate appliance into its final operating position and using a spirit level, adjust legs so that
appliance is level and at correct height.
10. Connect power supply to appliance.
11. Check electrical supply is within input rating specification, refer to 'Specifications' section).
Commissioning
1. Before leaving the new installation;
a. Check the following functions in accordance with operating instructions specified in 'Operation'
section of this manual.
 Light the Target Top Pilot Burner.
 Light the Target Top Main Burner.
 Check the Target Top Low Fire Burner operation.
 Check the Target Top High Fire Burner operation.
 Check the Oven Heating.
 Check the Oven Thermostat operation.
 Check the Oven Fan operation (GEC models only).

Check the current draw and loading for the equipment. Refer specification section for correct
electrical requirements.
 C heck that all the connections are correct and that all cover panels have been re-fitted.
 Ensure that this instruction manual is left with the appliance.
 Ensure that all the relevant details and contacts have been added to the front of this manual.
b. Ensure that the operator has been instructed in the areas of correct lighting, operation, and
shutdown procedure for the appliance.
2. This manual must be kept by the owner for future reference, and a record of Date of Purchase,
Date of Installation and Serial Number of Appliance recorded and kept with this manual.
(These details can be found on Rating Plate attached to front right hand corner of
bottom sill. Refer to ‘Gas Connection’ section).
NOTE:

If for some reason it is not possible to get appliance to operate correctly, turn ‘Off’
electrical power and gas supply and contact supplier of this appliance.

Make sure that electrical and gas supply are turned ‘Off’ before any service or maintenance
work is carried out on appliance.