Waldorf QUANTUM, Быстрый старт

Страница: 15 / 32

First Start
15 Quantum Quickstart
The Layer buttons show which Layer is active. Tap on the
corresponding button Layer 1 or Layer 2 to switch bet-
ween the layers. Under each layer button it is noted, if its
program uses specific modes like Arp, Sequencer, Unisono,
Mono and such. In case of an active split-mode, an appro-
priate icon of the split is displayed above the layer buttons.
For a layered sound played by both layers simultaneously,
an icon is displayed above the layer buttons.
Loading Programs
The Quantum offers different ways of loading sound pro-
grams:
•
When in Load mode ( Load button
lights), use the Selection dial to select
the desired sound program in the sound
list. Turning the dial clockwise increases the Program
number, turning the dial counterclockwise decreases
it. To load the desired sound program, press the
Selection dial once. You can also tap on the 1234
button to enter a desired sound number. After that,
tap on
Return to load this sound program. Tapping a
sound in the list will select the sound and the details
section on the right is shown more information about
the sound. Selection is depicted by showing a tur-
quoise frame. Tapping the sound a second time, i.e.
tapping an already selected sound will load it. The
loaded sound in the list is depicted by a white back-
ground.
r
You can also enter the Load mode page by tapping
on the sound program name.
r
You can also enter the sound number by tapping on
the sound program number.
r
You can filter sounds by attributes, banks, and
authors. Use the three silver endless knobs to the
left of the display. When set to
All you have access to
all existing sounds.
•
Press the Next or Prev
buttons to load the next
or previous sound pro-
gram immediately. This function is available in nearly
every mode and on every display page.
The right section of the Load Patch page gives you more
information about the selected sound. Beside the sound
name, here you find the
Bank , the Author and also the
Attributes . These settings can be made while saving a
sound program (see chapter ‘Saving Sounds’).
Tap on the Favorites button to open a new page for ma-
naging your favorite sounds. You can select any sound