background image

12 

Operation

 

Operation Guide 

1. 

Waldorf Gas Griddle Range Electric Oven have been designed to provide simplicity of operation and 

100% safety protection. 

2. 

Improper operation is therefore almost impossible, however bad operation practices can reduce the 

life of the appliance and produce a poor quality product.  To use this appliance correctly please read 
the following sections carefully:- 

 

• 

Lighting the Griddle - Pilots. 

• 

Lighting the Griddle - Main Burners. 

• 

Re-Setting the Overtemp Device. 

• 

Turning 'Off' the Griddle Main Burner / Pilot. 

• 

Static Oven (GP8910GE - GP8121GE). 

• 

Convection Oven (GP8910GEC - GP8121GEC). 

Piezo Igniters 

Ignites the Griddle 

Pilot Burners. 

Gas Griddle Controls

 

 OFF Position 

 PILOT Burner 

Temperature Gradient 

Fig 5 

Oven Thermostat 
Control 

  OFF Position 

Temperature 
Graduations 50°C to 

320°C 

Power Indicator 
Lamp (green) 

Heating Indicator 
Lamps (Amber) 
for Top & 
Bottom Elements 

Oven Top Heat Control 

 OFF 

Position 

LOW 

Position 

1

 Position 

2

 Position 

3

 Position 

4

 

Position

 

HIGH 

Position 

C

AUTION

 

• 

This appliance is for professional use and is only to be used by qualified 
people. 

• 

Only qualified service persons are to carry out installation, servicing or gas 
conversion operations. 

• 

Components having adjustments protected (e.g. paint sealed) by the 

 

manufacturer should not be adjusted by the user / operator. 

Содержание GP8910GE

































Отзывы: