500.0001-D
11
Technical alterations reserved
2.5.
Cable entry / power connection
As standard, each safe is equipped with three cable entry openings. These are
located on the right-hand side, in the lower rear area of the safe. If none of the
options listed below have been ordered, they are closed.
1.
Mains connection Paxos Advance / Axessor
230V plug-in power supply with approx. 5m cable
length.
2.
Alarm preparation
Alarm control cable 12x 0.14mm
2
with approx. 5m cable
length.
3.
LED illumination
Connection for LED power supply 230V with hollow plug
up to size WA-1200
from size WA-1450
Dimensions (HxWxD) 48x32x76mm
Dimensions (HxWxD) 32x50x125mm
4.
Power cable pull-in
The power cable for additional interior fittings is "just
pulled" into the safe. The supplied plugs T12 & T13
must be connected by an electrician.
To ensure that no cable breakage or other damage occurs to the cable or the power supply
unit, a lateral distance of at least 5-10cm from the nearest object, furniture, wall, etc. must
be planned.
