500.0001-D
6
Technical alterations reserved
2.3.
Anchoring the safe
PLEASE NOTE:
Assembly and anchoring may only be carried out by WALDIS Tresore
AG’s trained staff or by authorised specialists! WALDIS Tresore AG accepts no liability for
damage to people or property in case of incorrect assembly and anchoring.
2.3.1.
Important prior clarification
Check that the building floor and building wall are suitable for installing the safe and that
there are no wires, pipes or similar in the area to be drilled!
In case of doubt, an expert report should be issued to guarantee that the intended
assembly location in the building can withstand the weight of the safe, including its
contents.
2.3.2.
Preparing the safe
The four screw plugs (8mm Allen key) must be removed from the interior of the safe
before anchoring it through the rear wall or the base.
Anchoring sleeve
in the safe wall
Screw plug
