Safety reference: All codes are to be
securely stored. Do
NOT use personal data
(i.e. Birthdays, telephonenumbers, etc) as
a code. Change the factory code before
Reed this manual before you use the safe.
ATTEN: PLEASE SET NEW MASTER CODE PRIOR TO
USE!
Keep the door opened and unlocked.
�
Press key
“
CLEAR
”
twice, the display will show
“
PROG
”,
enter old master code (default
“
0
-
4
-
0
-
6
-
2
-
0
”)
and press
“
LOCK
”,
the display will show
“
NEW
”.
�
Enter your new master code of 6 digits and press
“
LOCK
”,
the display will show
“
AGAIN
”.
�
Enter your new master code again, the display will show
“
DONE
”
indicates new master code changed successfully.
Leisure plus
To set master code
How to set room number of safe
�
Double press
“
*
”
in HHD, display show
“
PROG
”.
�
Input
“
9999*6
”,
HHD will show
“
NO
”,
input 6
-
digit room
number and press
“
#
”,
HHD will show
“
DONE
”
means room
number set ok. Please fill with
“
0
”
in the front of room
number if less than 6 digits.
To set personal code
The personal code could be changed with new code when
locking the safe each time.
Please input 4
-
6 digits new code and press
“
LOCK
”
to lock
the safe.
To unlock the safe with personal code
Enter the correct personal code. The door will open
automatically, and display will show
“
OPEN
”.
Caution:
a) Display will show
“
ERROR
”
when wrong code
inputs. Four wrong code inputs consecutively put the safe
into secure
mode. Display will show
“
HOLD15
”
in effect the keypad is
inactive for 15 minutes.
b) To replace the code with
“
-
”
during the operation, please
press
“
0+LOCK
”.
This set is valid only for current
operation.
How to set date and time
Please set the date and time of HHD before connect to a
safe.
1) Set the date and time of HHD
a. Double press
“
*
”
in HHD, display will show
“
PROG
”.
b. Input
“
9999”
and press
“*”
then press key
“1”
, HHD
will show current date, input correct date (dd
-
mm
-
yy) and
press
“
#
”,
HHD will show current time, input correct time
(hh
-
mm
-
ss) and press
“
#
”
to finish.
2) Set the date and time of safe
a. Connect HHD with safe, Double press
“
*
”
in HHD,
display show
“
PROG
”.
b. Input
“
9999”
and press
“*”
then press key
“2”
, HHD
will show date then time and
“
DONE
”
means set ok.
