Wahlberg 352.701, Руководство пользователя

Страница: 23 / 32

352-353.805.006
23
Date: 2019-07-02
Service and maintenance
WARNING ! Read “Safety Information” on page 2 before servicing the product.
WARNING! Disconnect the unit from AC mains power and allow cooling down for at least 10
minutes before handling.
WARNING! Refer any service operation not described in this user manual to a qualified service
technician.
WARNING! Incorrect insertion of the powerCON TRUE1 may cause electrical contact
misalignment resulting in equipment malfunction and/or personal injury.
ATTENTION! Interval of inspections should be determined according to the frequency of use and
the working scenario of product.
ATTENTION! Signs of malfunction or poor operation should always lead to an inspection of the
product, and it should be taken out of operation until the error is eliminated.
Spare parts
Only parts ordered at or approved by Wahlberg should be used in the product to ensure correct
function and stability. Contact Wahlberg to inquire about spare parts.
On-site service
On-site service and maintenance can be provided by the Wahlberg Motion Design, giving owners
access to Wahlberg Motion
Design’s expertise and product knowledge in a partnership that will
ensure the highest level of performance throughout the product’s lifetime. Please con tact
Wahlberg Motion Design for details.
Maintenance plan
The results of all the regular inspections are to be documented and kept available at the company.
The written result of the last inspection must be kept available at the site of operation, e.g. by an
inspection sticker on the product showing the date of the inspection, the basis of the inspection
and the name of the inspector.
Before every use and weekly
Every time when rigging the product, before running the unit – and at least every week when
the product is in use:
−
Check that the attachment to the unit is in a good condition.
Monthly
At regular intervals – but at least every month when the product is in use:
−
Check the mounting clamps, snap hook or other mounting for damages and proper
fastening.
−
Change damaged parts according to this manual.
Yearly
The product must be inspected by a specialist every 12 months.
Every 48 months
The product should be inspected by an authorised expert every 48 months.