Wahl HEAT-Prober 392HP Скачать руководство пользователя страница 7

8

9

392 S

ERIES

M

ETER

S

PECIFICATIONS

Model

392HP

392E 

392EX

392E-S
392EX-S

392EVX

Range

-290 to 1450°F

-180 to 788°C

-290 to 1450°F

-180 to 788°C

-290 to 1450°F

-180 to 788°C

Digital Display

Bright 0.33"

LED

392E/392E-S

Bright 0.33" high LED

Red, 0.4" high

LCD

392EX/392EX-S

Red, 0.4" high LCD

Resolution 0.1° below 375°F (190°C). Auto Ranges to 1˚ above 375°F (190°C).

Meter Accuracy at 77°F

±0.1°F/C ±1 digit at 32°F (0°C)

System Accuracy

(Meter with 202

immersion probe)

±0.1°F ±1 digit

at ice point,

±0.25% reading

thereafter

±0.3°F at ice point, 

±0.5% reading thereafter

Repeatability

±0.2°F

Peak Hold

Microcomputer calculated, switch to “P” to activate

Ambient Operating

Range

0 to 130°F (-18 to +55°C)

Temperature

Coefficient

0.01 deg/deg over ambient range

FM (Factory Mutual)

Approved*

Class I & II,

Div. 1, Groups:

D, F, G

Class I & II,

Div. 1, Groups:

C, D, E, F, G

Not 

Available

Power

11681-1

6.25 V

NiCad Battery

11681-2

6.25 V

NiCad Battery

9V Alkaline

battery 

(NEDA 1604A)

Battery Life

4.5 hrs. per

charge

392E/392E-S

10 hrs. per charge

50 hrs.

per charge

Low battery

indication.

392EX/392EX-S

50 hrs. per charge

Low Battery Indicator

Yes

Noise Rejection

Greater than 40 dB at 60 Hz increasing at 20 dB per decade.
Spurious noise attenuated by internal 16 Hz filter.
392HP includes special noise rejection program for use in presence
of rampant EMF such as spark ignition engines.

Size

3" W x 6" L x 1.5" D (7.5 cm x 15 cm x 3.75cm)

Weight

12 oz. (340gm)

7 oz. (198gm)

* FM Approval Groups: C (Ethylene Gas), (Methane, Propane), (Metal Dust), (Coal
Dust), and (Grain Dust)

All 392 Models Available in °F, °C, or Dual Scale, add “F”, “C” or “D” to Model Number. Dual
Scale not available on -S Models.

392 S

ERIES

M

ETER

S

PECIFICATIONS

Model

392M
392MX

392M-S
392MX-S

392VX

Range

-60 to 752°F

-51 to 400°C

-60 to 752°F

-51 to 400°C

Digital Display

392M/392M-S

Bright 0.33" high LED

Red, 0.4" high LCD

392MX/392MX-S

Red, 0.4" high LCD

Resolution 0.1° below 375°F (190°C). Auto Ranges to 1˚ above 375°F (190°C).

Meter Accuracy at 77°F

±0.1°F/C ±1 digit at 32°F (0°C)

System Accuracy

(Meter with 202

immersion probe)

±0.3°F at ice point, 

±0.5% reading thereafter

Repeatability

±0.2°F

Peak Hold

Microcomputer calculated, switch to “P” to activate

Ambient Operating

Range

0 to 130°F (-18 to +55°C)

Temperature

Coefficient

0.01 deg/deg over ambient range

FM (Factory Mutual)

Approved*

Class I & II,

Div. 1, Groups:

D, F, G

Class I & II,

Div. 1, Groups:

C, D, E, F, G

Not 

Available

Power

11681-1

6.25 V

NiCad Battery

11681-2

6.25 V

NiCad Battery

9V Alkaline battery

(NEDA 1604A)

Battery Life

392M/392M-S

10 hrs. per charge

50 hrs.

per charge

392MX/392MX-S

50 hrs. per charge

Low Battery Indicator

Yes

Noise Rejection

Greater than 40 dB at 60 Hz increasing at 20 dB per decade.
Spurious noise attenuated by internal 16 Hz filter.
392HP includes special noise rejection program for use in presence
of rampant EMF such as spark ignition engines.

Size

3" W x 6" L x 1.5" D (7.5 cm x 15 cm x 3.75cm)

Weight

12 oz. (340gm)

7 oz. (198gm)

* FM Approval Groups: C (Ethylene Gas), (Methane, Propane), (Metal Dust), (Coal
Dust), and (Grain Dust)

All 392 Models Available in °F, °C, or Dual Scale, add “F”, “C” or “D” to Model Number. Dual
Scale not available on -S Models.

4.0  SPECIFICATIONS

Содержание HEAT-Prober 392HP




















Отзывы: