Wahl DST400, Руководство пользователя

Страница: 6 / 25

Wahl DSTCAL Software User Manual
6
3.
SCREEN DEFINITIONS
– RTD Models
Wahl DST/DSX Series Calibration Software (vX.X.X.XX) window; reference Fig. 1.
Note : Rolling the mouse indicator over a title or box will show additional information on
the specific subject.
File :
Activation
– This command allows entry of the Activation Key to change between
versions. User installation installs the DSTCAL version. Key for DSTCAL-Pro is only
available for the factory.
Check for updates
– Checks the Wahl Instruments website (www.palmerwahl.com) to
see if there are updates available and reports status of your software. Software will
prompt you to download new software if it is available.
Exit
– Closes the Calibration Software
Settings :
Fahrenheit / Celsius - Selects Fahrenheit or Celsius as the temperature scale to be
used when programming the 4 mA and 20 mA values (DSX models only).
SPY COM - Serial Communication Debug Tool. Not used during normal operation.
Help :
About
– Displays software version and contact information for Wahl Instruments.
Select “OK” to close.
Poll for Module:
This button is used to establish communication between the PC and the Instrument
being programmed/calibrated. In some cases, it may need to be clicked multiple times,
but usually no more than three.
Select COM Port:
This button opens the COM port selection window. This is used to select the proper
COM port. If the COM port the module is connected to does not show
, click “Refresh”
then “Scan All COM Ports”. Highlight the COM port and click “OK”.
Module Configuration Information
Module settings for S/N 99999001 : Identifies serial number of instrument.
Size : Size of the configuration data in bytes.
Model : Identifies instruments model number currently connected to DSTCAL software.
Firmware Revision : Identifies firmware revision of instrument.
Build Date : Identifies date firmware was compiled.