Wahl DST400, Руководство пользователя

Страница: 17 / 25

Wahl DSTCAL Software User Manual
17
Probe ID: 0536B5120000 - Displays serial number of current probe with which the
module is associated.
7.3. Probe Association
Upon connecting a unit to the pc and starting the software the unit is connected via the
“Poll for Module” button. If the probe connected to the unit is not the one associated
with the DST600 the following screen will appear:
Clicking “OK” will close this window. To associate the new probe, click the “Capture
Probe” button (Fig. 3).
The following screen will appear:
To associate the new probe, clicks yes, otherwise click no and the current probe will
remain associated.
Upon association of the new probe, the DST600 display should change from “Prb” to
the current temperature being measured by the probe within a few seconds.
- Used to associate a new probe with the DST600.
Capture
Probe
Enable Probe ID: Not Enabled Enable Probe ID
Shows current status of Probe ID