750 XTR Series
Assembly and Disassembly
56
System manual | Version: 2.0.0
7.5 Removing an I/O Module
An I/O module can be detached from the DIN-rail with the help of its release tab by
pulling it out of the assembly.
1. Pull up the orange release tab on the I/O module. To remove I/O modules with two
release tabs from a group, both tabs must be pulled at the same time!
Figure 31: Pull the release tab
2. Pull the I/O module out of the assembly by the release tab.
ð
When the I/O module is pulled out of the assembly, the electrical connections of the
data and power contacts are separated.
