0787-1216
Connection
Product manual | Version: 1.0.0
31
Compact Power Supply
!
NOTICE
Do not pull on the cables when using a screwdriver or operating tool!
When using a screwdriver or operating tool to remove the female connector
do not
pull
on the cables!
Grip underneath the protruding rim of the female connector to pull it out!
Inserting the Female Connector
DANGER
Make sure that the
picoMAX
®
female connectors are mated correctly.
Mismating the input female connector into the output connector may lead to a hazardous
voltage of 230 V on the output side.
•
Make sure the female connector is properly mated!
Proceed as follows to plug the female connector into the corresponding male header:
1. Insert the female connector into the corresponding male header.
Note
Ensure the correct alignment!
Make sure that the female connector is inserted with the correct alignment and in the right
male header:
The orange push-buttons must point outward from the product housing.
2. Push in the male header until the female connector snaps into position with an audi-
ble click.
3. When inserting with wiring: Check that the spring clamp is seated securely by gently
pulling on the wires.
