WAGO 787-1216, Руководство пользователя

Страница: 27 / 42

0787-1216 Connection
Product manual | Version: 1.0.0 27
Compact Power Supply
5 Connection
DANGER
Do not work on products while energized!
• Dangerous electrical voltage can lead to electric shock and burns.
Disconnect all power sources to the product before performing any installation, re-
pair or maintenance.
DANGER
Ensure a standard connection!
• To minimize any hazardous situations resulting in personal injury or to avoid failures
in your system, the data and power supply lines shall be installed according to stan-
dards, with careful attention given to ensuring the correct terminal assignment. Al-
ways adhere to the EMC directives applicable to your application.
!
NOTICE
Do not plug in or disconnect the female connector while a load is applied!
Only plug in or disconnect the female connectors when the product is not live! Failure to
observe this can result in damage to the contacts due to arcing!
!
NOTICE
Plug the female connectors all the way into the male connectors!
Always plug the female connectors all the way in to the male connectors. This ensures
proper contact at all times.
! NOTICE
Attach the free ends of the conductors using a strain relief device!
Female connectors can be pulled out of the male connectors by high vibration levels or
shock impacts!
Provide appropriate strain relief means to attach and cap any free ends of the conduc-
tors.
Note the maximum permissible connection cross-sections of the power cables (see
8
Technical data [
}
15] ).
Check the associated operating voltage before connecting the equipment (see Type
Plate).
Use only the recommended tools (see
8
Accessories [
}
37] ).