WAGO 787-1216, Руководство пользователя

Страница: 26 / 42

0787-1216 Installation and Removal
26 Product manual | Version: 1.0.0
Compact Power Supply
2. Tilt the forward forward and unhook it from the DIN rail.
4.3 Screw Mount
Two fastening clips are supplied with the product for screw mounting. Screw mounting is
possible using these fastening clips.
1.1
Figure 17: Snap-fit Openings for Fastening Clips – Top
2.1
Figure 18: Snap-fit Openings for Fastening Clips – Bottom
Table 26: Legend for “Snap-fit Openings for Fastening Clips” Figures
Position Description
1.1 Snap-fit opening top; rear fastening
2.1 Snap-fit opening bottom; rear fastening
1. Insert one fastening clip into each of the corresponding top and bottom snap-fit
openings on the housing (see “ 8 Snap-fit Openings for Fastening Clips – Top
[
}
26] and
8
Snap-fit Openings for Fastening Clips – Bottom [
}
26] views
from the top and bottom).
2. Push down the fastening clip until it locks into position with an audible click.
3. Gently shake the fastening clip to verify that it is fitted securely.
4. Fasten the product with the respective M4 screws (not included).
Please note the maximum torque of 2.9 Nm.
The exact dimensions and positions of the fastening clips are provided on the drilling tem-
plate supplied with the product.