WAGO 765-1205/0100-0000, Руководство пользователя

Страница: 26 / 102

765-1205/0100-0000 Functions
26 Product manual | Version: 1.0.0
8DIO FLD EC DC 24V 2.0A
5.2 Forcing
This section describes the “Force” function for the module’s input and output data.
In forcing, the physical states of the inputs or the output values of the higher-level con-
troller are “forcibly” overwritten with other values. The user provides these values and
identifies them as forcing values. This method is helpful for commissioning systems and
troubleshooting.
The “Forcing” function can be accessed through the following tools:
• WAGO I/O Field Webserver
• WAGO I/O Field app on mobile devices
Systems like SPS, TIA Portal and the like also have forcing functions. Such forcing func-
tions should not be confused with the ones described in this section and will not be con-
sidered within the context of this section.
A distinction is made between two types of forcing:
1. Input simulation means overwriting input data with replacement values.
2. Overwriting output data with replacement values means setting or resetting the mod-
ule outputs independent of the module’s process image.
Forcing Outputs
To force output data for test purposes, you can control all the outputs independent of the
actual process data value and set them to a specified alternative value.
For digital outputs, you can force pin 4.
Simulating Inputs
To simulate input data, you can set alternative values that are used for the input instead
of the actual process data values. This allows you to test how the system (i.e., the mod-
ule and a connected controller) responds to specific inputs.
With digital inputs, you can simulate pin 4.
Simultaneous Access
A device-internal mechanism prevents simultaneous access by multiple instances. This
ensures that only one single instance at a time ever has write access.
“Forcing” Operating Mode Must Be Enabled in the Parameterization
The “Forcing” operating mode can be switched off by the higher-level controller. This is
done with the “Force mode setting” parameter – see
8
Module Parameters [
}
39] . To
enable forcing, the “Force mode setting” parameter value must be set to 0 (“Enable force
mode”). This is the default setting in the device description file provided with the device.
The functional scope described can vary depending on the module type.
5.3 Monitoring Functions
The 765 Series modules have extensive internal sensors for measuring:
• Temperatures
• Currents