WAGO 750-652/040-000 Скачать руководство пользователя страница 13

Страница: 13 / 90

WAGO-I/O-SYSTEM 750 XTR

Important Notes 13

750-652/040-000 Serial Interface RS-232/RS-485 XTR

Manual

Version 1.3.0

Power from SELV/PELV power supply only!

All field signals and field supplies connected to this XTR I/O module

(750-652/040-000) must be powered from SELV/PELV power supply(s)!

Do not touch hot surfaces!

The surface of the housing can become hot during operation. If the device was

operated at high ambient temperatures, allow it to cool off before touching it.

Ensure proper contact with the DIN-rail!

Proper electrical contact between the DIN-rail and device is necessary to

maintain the EMC characteristics and function of the device.

Replace defective or damaged devices!

Replace defective or damaged device/module (e.g., in the event of deformed

contacts).

Protect the components against materials having seeping and insulating

properties!

The components are not resistant to materials having seeping and insulating

properties such as: aerosols, silicones and triglycerides (found in some hand

creams). If you cannot exclude that such materials will appear in the component

environment, then install the components in an enclosure being resistant to the

above-mentioned materials. Clean tools and materials are imperative for

handling devices/modules.

Clean only with permitted materials!

Clean housing and soiled contacts with propanol.

Do not use any contact spray!

Do not use any contact spray. The spray may impair contact area functionality in

connection with contamination.

Содержание 750-652/040-000



























































































Результаты поиска

Содержание 750-652/040-000

Отзывы:

Похожие инструкции для 750-652/040-000

Бренды по названию

Популярные бренды

WAGO 750-652/040-000, Руководство пользователя

Результаты поиска

Содержание 750-652/040-000

Отзывы:

Похожие инструкции для 750-652/040-000

Бренды по названию

Популярные бренды