WAGNER PROTEC 95-150 Скачать руководство пользователя страница 41

Страница: 41 / 88

VERSION 01/2020

ORDER NUMBER DOC2340282

IceBreaker 150-300 cm

CLEANING AND MAINTENANCE

8.1

CLEANING

8.1.1 CLEANING PERSONNEL

Cleaning work should be undertaken regularly and carefully by qualified and trained

personnel. They should be informed of specific hazards during their training. The following

hazards may arise during cleaning work:

− Health hazard from inhaling solvent vapors.
− Use of unsuitable cleaning tools and aids.

8.1.2 DECOMMISSIONING AND CLEANING

The device should be cleaned for maintenance purposes, etc. Ensure that no remaining

product dries on and sticks to the device.

Procedure

1. Carry out work interruption Chapter

7.4

2. Carry out the basic flushing Chapter

7.5

3. Empty system in a controlled manner Chapter

8.2.4

4. Service spray gun in accordance to its operating manual.
5. Clean and check the suction system and the suction filter.
6. When using a product filter, check filter insert and filter housing and clean or replace

them. Chapter

8.2.6

7. Clean the outside of the system.
8. Fully assemble the system.
9. Check fill level of the separating agent Chapter

8.2.3.1

10. Fill the system with flushing agent in accordance with Chapter

8.2.5

8.1.3 LONG-TERM

STORAGE

When storing the device for longer periods of time, it is necessary to thoroughly clean it

and protect it from corrosion. Replace the water or solvent in the product pump with a

suitable preservative, fill separating agent cup with separating agent.

Procedure

1. Perform points 1 to 8 in Chapter

8.1.2

2. Fill the system with preservative in accordance with Chapter

8.2.5

3. Empty the system in a controlled manner in accordance with Chapter

8.2.4

and seal

the openings.

Содержание PROTEC 95-150

























































































Результаты поиска

Содержание PROTEC 95-150

Отзывы:

Бренды по названию

Популярные бренды

WAGNER PROTEC 95-150, Оригинальное руководство по эксплуатации

Результаты поиска

Содержание PROTEC 95-150

Отзывы:

Бренды по названию

Популярные бренды