manualshive.com logo in svg

WAGNER PROTEC 95-150, Оригинальное руководство по эксплуатации

Поделиться
Скачать
WAGNER PROTEC 95-150 Скачать руководство пользователя страница 34

34

VERSION 01/2020

ORDER NUMBER DOC2340282

IceBreaker 150-300 cm

3

 

6.5 

ASSEMBLY AND INSTALLATION

WARNING

Inclined ground!

Risk of accidents if the device rolls away/falls.

Place the device on horizontal floor.
If the floor is inclined, position the feet of the trolley towards the gradient.
Secure the trolley.

National regulations

Ensure that the national explosion prevention rules and regulations are observed 

when setting up the device.

This pump can be used as part of a spraying system for Airless applications. The individual 

components are shown in the accessories, or can be arranged with a spraypack configurator. 

The nozzles must be selected according to the spray gun operating manual. In the case of 

spraypack orders, the pump (1) is already pre-mounted on the trolley (6) at the factory.

1. Mount pump (1) on frame, trolley (6), or wall mount. When using a wall mount, the 

fluid section must be turned by 180°.

2. Mount high-pressure filter (3).
3. Fit suction system (5).
4. Mount return tube (4) or return hose.
5. Connect high-pressure hose and spray gun (2) according to the operating manual for 

the spray gun.

B_07668

5

6

4

1

3

2

Airless system

Содержание PROTEC 95-150

























































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды