WAGNER PEM-CG3, Руководство по эксплуатации

Страница: 2 / 24

PEM-CG3 Introduction
Powder Cup Gun PEM-CG3 Article No. 0351035
X
45
0 m
m
D
H
F
G
J
B
C
E
A
K
L
X
green
red
A Electrode
B Deflector
cone
C Outer nut
D Spray gun body
E Trigger
F Air supply (input air)
G Electrical connection
H Powder container with fluidization
J Adapter with integrated powder injector
K Setting
knob red for setting the feed air
L Setting knob green for setting the fluid air
The Corona manual spray gun
PEM-CG3 can be used for conventional types of powder and
metal powder that can be electrostatically charged is mainly suitable for laboratory tests,
sample coating and/or low volume production.
This cup gun can be operated with the following control units:
•
EPG 2007 control unit
Actuating the trigger activates the high voltage in the spray gun. At the same time, the powder
and compressed air supplies to the gun are turned on. The compressed air is required for
atomizing, feed, dosing and fluid air applications.
The cup gun is equipped with a powder container with a capacity of 500 cm
3
.
A 900 cm³ powder container can also be mounted on the cup gun.
You will find the article numbers in the spare parts list on page 18 in chapter 6.3 .
Caution
The operator must ensure that the spray gun is only connected to Wagner devices!
To secure the spray guns, the control unit must be switched off.
0351713 2 03/2003