Maintenance PEM-CG3
4.4
Check the standard settings
The spray gun has a factory setting for generating an optimum spray pattern with any
standard powder:
Input air pressure:
max. 29 psi (2 bar)
Powder output quantity:
max. 200 g/min
Type of powder:
Standard powder with a grit size distribution of
35 ... 40%
<
32
µ
m
•
Check the input air pressure and readjust if necessary.
•
Check the fluid base of the powder container for damage and replace with a new one if
necessary.
K
L
K
Set feed air 1)
L
Set fluid air 1)
M
Set dosage air 1)
N
Set atomizing air 1)
1) Turning counter-clockwise the value is increased.
M
N
Caution
The spindles
M
and
N
should be
never
screwed in completely
(
Danger of destruction!
).
The spray pattern can be reset if necessary by adjusting the dosing air
M
and/or atomizing air
N
.
Hint
At a desired powder output of more than 200 g/min increase the input air pressure of the
spray gun at the control unit to max. 58 psi (4 bar):
•
The powder output can get to a maximum of 300 g/min.
•
Normally the dosage air
M
and the atomizing air
N
have not to be adjusted.
03/2003 15 0351713
Содержание PEM-CG3
Страница 23: ......
