WAGNER PEA-C4 Twin-HiCoat, Руководство по эксплуатации

Страница: 10 / 36

Preparing the spray gun
10
390832
-
PEA-C4 Twin-HiCoat
09/2014
2. Preparing the spray gun
2.1 Selection of the suitable nozzle system
0201_ .doc
Nozzle Overview Application Spray Pattern
Fan spray nozzle
Difficult workpieces:

undercuts

profiles

flat workpieces
(reduced picture frame)
Widely spread flat powder cloud.
Deflector cone

Wire goods

Grid designs
Oval powder cloud:
Size is dependent on the deflector
cone diameter.
Nozzle Application
Distance to
workpiece
[mm]
Powder output
[g/min]
F1 1)
Universal application
(slow powder cloud):

deep and complex shapes

extensive workpieces
120 ... 300 50 ... 250
F2 1)
Targeted application
(dense powder cloud):

high penetration

wide coating range
120... 400 30 ... 200
F3 1)
Low powder application
(faster powder cloud):

very good dispersion with low air
and powder quantities

for all workpieces
120... 300 30 ... 150
HPO-1 1)
Wide fan spray nozzle
for high powder application
(slow powder cloud):

good dispersion

special for extensive workpieces
> 200
(+ total air
< 4,5 Nm
3
/h
150 ... 400
R20

20 mm:

small even workpieces
100... 300 30 ... 250
1) Nozzles are labeled on the back.
F1