WAGNER PEA-C4 Twin-HiCoat, Руководство по эксплуатации

Страница: 13 / 36

Preparing the spray gun
09/2014 390832
-
PEA-C4 Twin-HiCoat
13
2.3 Grounding
For safety reasons, the spray gun must be properly grounded. This occurs through the spray
gun adapter.
0203_ .doc
Good grounding of the workpiece is also necessary for optimum powder coating.
A poorly grounded workpiece causes:

dangerous electric charging of the workpiece

back-spray onto spray gun and user

uneven coating

very bad wrap around
Warning
Sparks between workpiece and conveyor hooks (hangers) can occur if hooks or
other hanger parts are not completely cleaned!
These sparks can cause heavy radio frequency interference.
2.4 Reproducible setting of the nozzle position
0204_ .doc

For a horizontal powder cloud, the fan spray nozzle
is set where the protective wedge is in the 0°position.

When attaching a round spray nozzle, we
recommend turning the protective wedge in the
90° position to achieve a smoother coating
(the protective wedge is now in the vertical position).
It is possible to set it other positions for special
applications.
On the nozzle body and electrode holders there are X
markings. In 15° steps, the position can be changed if
necessary and reproducibly.
The outer nut has to be removed for exact positioning.
Peac4_0014
An adjustment tool is provided for the fan spray
nozzle .
It permits turning the fan spray nozzle without
damaging the electrodes and without removing the
outer nut.
The outer nut only has to be slackened.