WAGNER PEA-C4 Twin-HiCoat, Руководство по эксплуатации

Страница: 19 / 36

Maintenance and cleaning
09/2014 390832
-
PEA-C4 Twin-HiCoat
19
Hint
For inserting the protective wedge the same wedge tool will be used.
1
Wedge tool
2
Protective wedge
3
Electrode holder (cut open view)
Proceed as described below:

Guide the protective wedge
2
into the
wedge tool
1.

Insert both parts in the opening on the
electrode holder
3
to the stop.

If it is not possible to push the wedge tool in
as far as the mark
X,
rotate the wedge tool
a little until it can be pushed into the mark.
The mark
X
must be flush with the end
Y
of
the electrode holder.

The protective wedge is now correctly
assembled and the wedge tool can be
pulled back out of the electrode holder.
The protective wedge remains inserted in
the electrode holder.
You will find the necessary wearing parts and spare parts in chapter 8.2 of this manual.