WAGNER PEA-C4 Twin-HiCoat, Руководство по эксплуатации

Страница: 22 / 36

Maintenance and cleaning
22
390832
-
PEA-C4 Twin-HiCoat
09/2014
4.5 Mounting the Corona-Star
0405_ .doc
The Corona-Star is a Retrofit-Set for the spray gun, which helps to achieve a better surface
quality (reduction of "orange peel").
Caution
Trained personnel may only carry out the assembling of the Corona-Star!
Prior to mounting the Corona-Star, the high-voltage and the powder feed must be
switched off and secure against inadvertent switch on!
Proceed as described below:
A
C
E F
B
D
G
1
2
3
Peac4_0012

Switch off the high-voltage and the powder
feed and secure against inadvertent switch
on.

Unscrew the standard nut A from the spray
gun housing B .

Screw the new Corona-Star nut D onto the
spray gun housing and fasten in place.

Fasten the cable guide onto the cover
plate F by using the screw E.

Slide the Corona-Star G onto the spray
gun housing B .
Caution
Check whether the grounding is assured!
The spray gun is ready for use again.