WAGNER GA 4000ACIC-S, Перевод оригинального руководства по эксплуатации

Страница: 9 / 68

9
VERSION 05/2018 ORDER NUMBER DOC 2312956
GA 4000ACIC
2 CORRECT USE
2.1 DEVICE TYPE
Automatic gun for automatic coating of work pieces.
2.2 TYPE OF USE
The gun is suitable for atomizing liquid products, particularly coating products, using the
AirCoat process.
WAGNER explicitly prohibits any other use!
The device may only be operated under the following conditions:
Use the device only to work with the products recommended by WAGNER.
Only operate the device as a whole.
Do not deactivate safety fixtures.
Use only WAGNER original spare parts and accessories.
The operating personnel must be trained on the basis of this operating manual.
Follow the instructions in the operating manual.
2.3 FOR USE IN POTENTIALLY EXPLOSIVE AREAS
The device is suitable for use in potentially explosive areas as defined in Directive
2014/34/EU, (see Explosion protection marking Chapter 3.1 ).
2.4 PROCESSIBLE WORKING MATERIALS
Top-coat lacquers, primer paints, corrosion protection, textured lacquers, lyes, staining
solvents, clear lacquers, separating agents, etc. with a solvent or water base. If you want to
spray working materials other than the aforementioned, contact a WAGNER representative.
When operating the device with a coating product with a temperature of > 43 °C; 109.4
°F, identify the device with a warning label that says "Warning - hot surface" according to
Chapter 4.2.6 .
Note:
Contact your local WAGNER dealer and the lacquer manufacturer if you encounter
application problems.
2.5 MISUSE
Misuse can lead to physical injury and/or property damage!
Special attention must be paid that:
no dry coating products, e.g. powder are processed;
no food, medicine or cosmetics are processed.