WAGNER GA 4000ACIC-S Скачать руководство пользователя страница 10

Страница: 10 / 68

VERSION 05/2018

ORDER NUMBER DOC 2312956

GA 4000ACIC

IDENTIFICATION

3.1

EXPLOSION PROTECTION IDENTIFICATION

As defined in the Directive 2014/34/EU (ATEX), the device is suitable for use in potentially

explosive areas.
Device type:

AirCoat automatic gun

Manufacturer:

Wagner International AG
9450 Altstätten
Switzerland

II 2G X

European Communities

Symbol for explosion protection

Device class II

Category 2 (zone 1)

Ex-atmosphere gas

Special notice

3.2

IDENTIFICATION "X"

The maximum surface temperature corresponds to the permissible product temperature.

This and the permissible ambient temperature can be found in the "Technical Data"

chapter.

Safe Handling of WAGNER Spray Devices

Mechanical sparks can form if the device comes into contact with metal.
In an explosive atmosphere:

Do not knock or push the device against steel or rusty iron.
Do not drop the spray gun.
Use only tools that are made of a permitted material.

Ignition temperature of the coating product

Ensure that the ignition temperature of the coating product is above the maximum

surface temperature.

Medium supporting atomizing

To atomize the product, use only weakly oxidizing gases, e.g., air.

Cleaning

If there are deposits on the surfaces, the device may form electrostatic charges. Flames or

sparks can form during discharge.

Remove deposits from the surfaces to maintain conductivity.

Содержание GA 4000ACIC-S





































































Результаты поиска

Содержание GA 4000ACIC-S

Отзывы:

Бренды по названию

Популярные бренды

WAGNER GA 4000ACIC-S, Перевод оригинального руководства по эксплуатации

Результаты поиска

Содержание GA 4000ACIC-S

Отзывы:

Бренды по названию

Популярные бренды