manualshive.com logo in svg

WAGNER Cobra 40-10/2K, Перевод оригинального руководства по эксплуатации

Поделиться
Скачать
WAGNER Cobra 40-10/2K Скачать руководство пользователя страница 39

39

OPERATING MANUAL

VERSION 07/2014

ORDER NUMBER DOC2349980

8 

CLEANING AND MAINTENANCE

Cleaning work should be undertaken regularly and carefully by qualifi ed and trained staff . 
They should be informed of specifi c hazards during their training.

The following hazards may arise during cleaning work:

-

Health hazard from inhaling solvent vapors

-

Use of unsuitable cleaning tools and aids

8.1 

CLEANING

8.1.1 

CLEANING STAFF

Brittle fi lter pressure regulator! 

The tank on the fi lter pressure regulator becomes brittle through 
contact with solvents and can burst.
Flying parts can cause injury.

  Do not clean the tank on the fi lter pressure regulator with 

solvent.

WARNING

Gas mixtures can explode if there is an incompletely filled pump!

Danger to life from fl ying parts.

  Ensure that the pump and suction system are always completely 

filled with cleaning agent or working medium.

  Do not spray the device empty after cleaning.

WARNING

8.1.2 

SAFETY INSTRUCTIONS

Содержание Cobra 40-10/2K

















































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды